Release Date: 30 May 2008
Release ID: 2197
It will definitely help to decrease the porosity in castings. Many customers have used this product after they came to know about it by going through this site and have also found useful results.
Storo, Italy ( Freightnet ) May 29, 2008 The site en.fondvacuum.in ( http://en.fondvacuum.it ) gives us information about the Fond Vacuum sealing system. The products are a direct result of the experiment of Pierino Bresciani, an expert in pressure die-casting for brass, zinc and aluminium. He reported to the press people that the vacuum die-casting machines ( http://en.fondvacuum.it/products-foundry.html ) will help in the age old problem of porosity in castings.
The site gives a good account of the experience of the founder of this fond vacuum, Mr.Pierino Brescino. He made experiments with the pressure die casting ( http://en.fondvacuum.it/ ) machine and the sealing of the machine was constructed according to his own design. The Vacuum Die-casting Equipments are internationally registered with three patents. At present there are 2 products that have already gone into the production mode and are a big success with customers. The main purpose of this site is to help the customers know that when there is such a productive and useful vacuum die casting machine like Fond vacuum then there is nothing much to worry about the castings on the brass,zinc and alloy.
It will definitely help to decrease the porosity in castings. Many customers have used this product after they came to know about it by going through this site and have also found useful results. Most of the customers have given positive response about this product . Mr. Bresciani further plans to increase the production capacity of this machine. He is going to further redesign the machine by increasing its production capacity.
Analysts predicts that Mr Brescino also has plans to take this machine to the global lines and sell his products online. He said that it would be very much convenient for the customers when the machine is sold online. They can place the order over the Internet and receive the machine at their address in a quick time span. For this he is planning to put an efficient supply chain in place which can help him to serve his customers better.
Mr Brescino is no doubt a very innovative thinker and has thus been successful in planning, designing and manufacturing this product. Analysts predicts that he is going to increase some of the technical and programming features of the machines so that it becomes a multi purpose machine.
At present there are two different kinds of machines, the suctioning power unit and the Vacuum valves and product designing and innovation is always underway. More products are expected to be launched soon. He wants the machine to do several tasks with less time. It is also predicted that he will further reduce the speed of this machine so that things which was done in few minutes previously can now be done in a substantially lesser time.
In a post lunch tête-à-tête with journalists he shared many of his past experiences and said that the products are surely going to make a difference to the casting industry. Mr Brescino said that he has worked upon a plan to to sell this machine in some of the countries like US, UK and many more countries abroad.
PRESSURE DIE-CASTING FOR BRASS
Via Pozzo Madama
30 38089 Storo (TN)
Tel +39 0465 686047
© The Adora Group Limited 2016 - Publishers of Freightnet